Humminbird HDR 650 User Manual download pdf (Page 19)

3. Put the pivot bolt through the assembly to

hold it in position and loosely install the nut,

but do NOT tighten the nut at this time (see

the illustration Inserting the Pivot Bolt).

Insert the pivot arm assembly into the

mounting bracket (see the illustration

Inserting the Pivot Arm Assembly Into the

Mounting Bracket). Do NOT snap the

assembly closed, as you will need to access

the mounting bracket in the next step.

NOTE: If the pivot assembly is snapped closed over the mounting bracket, use a flat

head screwdriver or similar tool to gently pry the assembly away from the

mounting bracket (see the illustration Prying the Assembly Away from the

Mounting Bracket).

Transducer Knuckle Positions

Ratchets Placed in Position 1

Ratchets Placed in Position 2

Rib

Fitting the Mounting Bracket

over the Ratchet

Knuckle

Rib at

position 1

Beads

Ratchet

Bead

Ratchet

Inserting the Pivot Bolt

Transom Mount Transducer Installation

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

No comments

Humminbird HDR 650 User Manual Page 19