Humminbird VHF255SW User Manual download pdf (Page 51)

SETUP MENU

The radio’s setup functions are accessed through the Setup Menu. Setup Menu

selections are as follows:

CONTACTS: Selects the Contact List Entry routine to enter Names and MMSI numbers

for frequently-called DSC stations. Up to 20 Contact Names can be stored.

LOCAL/DIST: DIST (Distant) allows normal receive sensitivity, while LOCAL eliminates

receiver noise, but degrades receiver sensitivity. Only Local mode has an icon, the

LOCAL icon.

BACKLIGHT: Sets the backlight level; 8 total levels are available.

CONTRAST: Selects the display contrast setting; 8 levels of contrast are available.

GPS/TIME: Allows you to manually set position and time data if no GPS is attached, and

defines if and how position and time data, time offset, and COG/SOG settings are

displayed.

RADIO SETUP: There are 4 items that you can customize: CH Name, Ring Tone Volume,

Beep Volume and Internal Speaker on/off.

DSC SETUP: There are 5 functions that you are allowed to alter: User MMSI entry,

Group MMSI entry, Individual Reply, DSC enable, and POS reply.

RESET: This resets almost all settings to factory defaults.

EXIT: This provides another way to exit the Setup Menu.

NOTE: During Setup operation, TX and RX are disabled.

CONTACTS

LOCAL/DIST

BACKLIGHT

CONTRAST

GPS/TIME

RADIO SETUP

DSC SETUP

RESET

EXIT

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 89 90

No comments

Humminbird VHF255SW User Manual Page 51