Humminbird 531906-1EN_A User Manual download pdf (Page 10)

A. Two 700 Series™ Units

1. Insert the AS EC QDE Ethernet cable connector into the

Ethernet slot on the 700 Series™ cable collector. Repeat this

step for the second AS EC QDE cable.

NOTE: The 700 Series™ control head uses a cable collector for the Quick

Disconnect Mount and the In-Dash Mount. See your control head installation

guide for details.

2. Connect the AS EC 10E to each round connector on the

AS EC QDE cables.

3. Hand-tighten the screw nut(s) on each cable to secure the

connection. The connectors are keyed to prevent incorrect

installation, so be careful not to force the connectors.

B. One 700 Series™ Unit & One 800/900/1100 Series™ Unit

1. Insert the AS EC QDE Ethernet cable connector into the

Ethernet slot on the 700 Series™ cable collector.

NOTE: The 700 Series™ control head uses a cable collector for the Quick

Disconnect Mount or the In-Dash Mount. See your control head installation guide

for details.

2. Insert one end of the AS EC 10E cable into the Ethernet port on

the back of the 800/900/1100 Series™ control head. The

connectors are keyed to prevent incorrect installation, so be

careful not to force the connectors into the port.

700 Series™ Quick Disconnect Mount Cable Collector

Ethernet

Installation

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 38 39

No comments

Humminbird 531906-1EN_A User Manual Page 10