Humminbird 531906-1EN_A User Manual download pdf (Page 27)

Change the Temperature Source

To change the temperature source after the network has been configured,

open the Network Source Setup dialog box to change the temperature sources

at any time (see Select a Temperature Source). Network settings are saved

even after the unit is powered off.

• Temperature Graph (1100 Series™): Temperature Source 1 provides

the data for the temperature graph on the display. When the

temperature source is changed, the temperature graph displays a red

mark to show where the temperature source was changed.

NOTE: The Temperature Graph menu setting is not shared on the network. It is a

local menu setting.

• If the control head cannot detect the set temperature source, the

digital readout box will flash. If the digital readout box is blank, the

source has been lost. Open the Network Source Setup dialog box to

assign a temperature source to the digital readout box. See Select a

Temperature Source for details.

Temperature Graph

(Source: Temp. 1)

Temperature Graph

1100 Series™

Red marks

indicate where

the temperature

source changed.

Temperature Sources

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 38 39

No comments

Humminbird 531906-1EN_A User Manual Page 27