Humminbird 531906-1EN_A User Manual download pdf (Page 21)

4. Select: Press the RIGHT Cursor key. The check mark indicates that the

source is being used by the control head.

5. Save: Press the EXIT key twice to close the dialog box. Network

settings are saved even after the unit is powered off.

Local Setup (default): To use separate transducers for each control

head, repeat steps 1 - 5 on each control head until you’ve set a

transducer for each unit.

Shared Setup: To use the same transducer with more than one control

head, repeat steps 1 - 5 on each control head and select the same

transducer for all units.

Menu System and Views: When you select a sonar source, the

control head updates with the corresponding menu options and views.

If the transducer is shared between control heads, it may take a

moment for the data to synchronize. See Sonar Source Overview for

more information.

Selecting a Transducer

Available

Sonar Sources

Press the

RIGHT or LEFT

Cursor key to

select a tab.

Selected

The check mark

indicates the

transducer is used

by the control head.

Unit Model

Number

Column

Transducer

Model

Column

Beam

Frequencies

Column

Unit Name

Column

(see Customize

the Unit Name)

Empty

The empty box

indicates the

transducer data is

available but not

selected. You must

select a transducer

to display its data

on the control head.

Sonar Sources

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

Comments to this Manuals

No comments

Humminbird 531906-1EN_A User Manual Page 21

Comments to this Manuals